Cemix Products Ltd
-
Cemix Aquastop
CEMIX AQUASTOP is a white, cement based, waterproofing membrane, designed for use on concrete and masonry surfaces in positive and negative pressure applications. CEMIX AQUASTOP can be used as an interior and exterior waterproofer on surfaces including concrete, masonry and exterior use plaster. It can be used as a decorative, white finish. Alternatively, it can be tinted or painted over.
-
Cemix Crystal Proof
CEMIX CRYSTAL PROOF is a grey, cement based, penetrating waterproofer, designed for use on concrete surfaces in positive and negative pressure applications. It reacts with free lime and moisture in the concrete’s capilleries, continuously forming an insoluble, crystalline structure, thus offering permanent protection. CEMIX CRYSTAL PROOF can be used as an interior and exterior waterproofer on concrete surfaces, including: Water retaining structures such as water storage and drinking tanks. Inground structures such as lift shafts. Underground structures such as basement retaining walls and tunnels.
-
Cemix Bituproof Plus
CEMIX BITUPROOF PLUS is a bitumin waterproofing membrane, designed for use on a variety of surfaces in positive pressure applications. For exterior, below ground use only. CEMIX BITUPROOF PLUS can be used as an exterior, below ground waterproofer on surfaces including: Concrete and masonry retaining walls. Wooden and aluminium posts.
-
Cemix Laitite Fire Cement
CEMIX LAITITE is a fine, plastic, air setting refractory mortar, designed to harden with heat. It is used in the construction of flues, kilns and ovens, where temperatures can reach up to 1400ºC. Used for applications including: Flues, Ovens & Kilns. Ready to use. Can withstand temperatures of up to 1400ºC
-
Cemix Quick Patch
CEMIX QUICK PATCH is a fast setting, high strength, polymer modified, grey cement based mortar, designed for horizontal, vertical and overhead patching of concrete surfaces. CEMIX FLOOR REPAIRER can be used as a patching mortar on concrete, mortar and masonry surfaces.It can also be used for creating falls. It can be applied up to 20mm in depth per layer. Suitable for interior and exterior use.
-
Cemix Accelerset
CEMIX ACCELERSET is a calcium chloride based accelerator and densifier, designed to be used in cement mixes, where an accelerated set time and high early strength is required. CEMIX ACCELERSET can be used in applications where there is limited time for completion, including road repairs, cold weather concreting, as well as concrete precast and sea defence work.
-
Cemix Cemkey Concentrate
CEMIX CEMKEY CONCENTRATE is a water based primer and bonding agent, designed to improve the adhesion of CEMIX products to porous, cementitious substrates. CEMIX CEMKEY CONCENTRATE can be used on concrete, masonry, screeds and fibrous cement sheeting. It can be used with the subsequent application of CEMIX tile adhesives, floor levellers and floor repairers on substrates as per the manufacturer’s recommendations for these. Suitable for interior use only.
-
Cemix Cemplus
CEMIX CEMPLUS is a highly concentrated, non-staining, liquid plasticiser, designed to improve the workability and adhesion of exterior use plaster and mortar. CEMIX CEMPLUS can be used as an air entraining additive for exterior use plaster and mortar, removing the need for adding lime to the mix.
-
Cemix Multibond
CEMIX MULTIBOND is a water based bonding agent, designed to improve the adhesion of CEMIX products to a variety of porous substrates. CEMIX MULTIBOND can be used on concrete, masonry, cement renders, screeds, fibrous cement sheeting, plasterboard, timber, timber sheeting (plywood and particleboard) and stone. It can be used with the subsequent application of CEMIX tile adhesives, floor levellers and floor repairers on substrates as per the manufacturer’s recommendations for these. Suitable for interior and exterior use.
-
Cemix Cemplaster
CEMIX CEMPLASTER is an exterior use plaster used for block and brick work, and concrete substrates, in civil, commercial, industrial and residential applications. The results of CEMIX CEMPLASTER are only assured when the product is used in conjunction with CEMIX CEMSPLASH, in accordance with manufacturer’s recommendations. Used for applications including: Brick & Block Work, Roughcast and Walls.
-
Cemix Cemsplash
CEMIX CEMSPLASH is a fast setting key coat used for block and brick work, and concrete substrates, in civil, commercial, industrial and residential applications. It is designed to be used in conjunction with CEMIX CEMPLASTER. Used for applications including: Brick & Block Work, Roughcast and Walls.
-
Cemix Concrete Resurfacer
CEMIX CONCRETE RESURFACER is a high performance concrete resurfacing mortar, designed to refresh and repair aged concrete. CEMIX CONCRETE RESURFACER can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small defects, such as spalls and gouges. Suitable for use in interior and exterior applications in a domestic and commercial environment, including driveways, paths, patios, courtyards, garages and most vertical concrete surfaces.
Cemix, a tried and trusted brand
Cemix provides outstanding product value through leading edge solutions for over 30 years. They house the most advanced manufacturing facility which enables them to produce innovative products that are perfectly suited to the New Zealand market. Their continuous product improvement program and industry leading technical expertise ensures that high standards of product quality, customer service and satisfaction are maintained.